Star Wars Arquitens Light Cruiser 2 feet long 3d pinted PLA

Description

This item is a 3D printed version of the Star Wars
Arquitens Light Cruiser
. It is not 100% movie, tv show or comic accurate. This is a kit item, meaning that you will receive the parts straight off of the 3D printer, and will have to assemble and do all of the finishing touches yourself.
DO NOT put PLA printed models in the sun or they will warp or even melt. Even if painted.
I had a power outage during the last 2 hours of the top or front of this model and had to reprint the very top 1 inch of the tips and glue them on.
There will be a small seam on the very top of the ship that will need sanding and filling. This part takes nearly 3 days to print, so I chose to fix it rather than scrap
a otherwise perfectly good part. If you want a picture of the part please send me a message.
--TERMS--
3D printed props and prop kits are sold with a zero return, zero refund policy. 3d printed items, even finished items, will have small imperfections, period. Photos show you exactly what you're getting and please understand that while fairly durable, these props are meant as display items, and can be scratched or broken if mishandled. Any 3d works that require attribution by license are shipped with a small tag, naming the original designer.
Kits may come in colors other than what is pictured. They are printed using whatever color filament we have on hand at the time.
I recommend using 5 minute epoxy to glue the model together, (Do not use superglue, it sets too fast), then sand down the seams.
I also recommend using a good 2 in 1 filler and primer in very light coats and then wet sanding with fine grip sandpaper and repeat until you get the smooth finish you want. Support was needed in several places and it will be rough in those areas.
The model is printed at just a little over 2 feet long, I do not know what scale that makes it.
It comes in 5 main ship pieces, 4 gun turrets that are friction fit and can rotate, 3 small tie fighters (one for the front hangar bay and 2 more for show, they will not fit inside the 2 lower hangars), 2 stands for the front and back (placement seen in the last 2 picures). There was a lot of support needed and those areas will be rough.
The picture with the Venator along side the Arquitens is for scale only, (the Venator is not included).