-40%
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA

Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA

$ 10559.99

Availability: 100 in stock
  • Refund will be given as: Money Back
  • Condition: R2 Ready for Resale. No programming software included.
  • Model: Harris MASTR V
  • All returns accepted: Returns Accepted
  • MPN: EA-555002-001
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Type: Base Station
  • Features: Repeater
  • Brand: Harris
  • Band: VHF

    Description

    Up for sale is
    Harris MASTR V 100W VHF 150-174Mhz P25 Radio Repeater w/ 4TX/4RX HPA/PS SCADA
    This sale includes
    MASTR V Base Station 14-Slot Chassis with 4TX cards, 4RX Cards, 4 Traffic Controller Cards, 2 Baseband Processor Cards
    EA-555002-001
    MASTR V HPA/PS Chassis Assembly
    MA-555003-001
    Network Sentry II - Base Unit
    CM21874-1650
    Interoperability Gateway
    CM-013189-001
    MASTER-III Base Station Radio Repeater Power Supply
    PS103010V120 1A
    Fan Tray Assembly
    EA-5555015-01
    Site Pro Controller
    EA101209V11
    QFS-106 6-Port Frequency Standard
    CY102784V5
    This unit has been used but still appears to be in good condition with minor scratches and scuff marks from normal wear and tear.
    This item has been tested. Please see the test log below:
    Harris MASTR V Base Station P25 Digital IP Based LMR Communications Wired +5V/+12VDC from HPA/PS assembly to MASTRV chassis; was able to power MASTRV shelf on and all modules. Baseband Processor Channel indication reads healthy. TX/RX module activity is solid green. Baseband Processor is in standby mode. Held reset button down for a short while on chassis and modules. TC displays changed to read LDR. Connected to Traffic Controller COMM port at 9600 baud using USB type-A to type-A data cable. Rebooted shelf. Was able to access MastrV Traffic Controller CLI after resetting. Ran 'ALL' tests option from test mode; all tests PASSED. Results and console log below:
    ********************************************************** MastrV Traffic Controller Standard USB CLI Copyright HARRIS 2010, Lynchburg, VA. Type HELP for a list of all commands available. HELP will give the usage of the . ********************************************************** P25T Ch 06> 0000028719: DBLoader Multicast IP Setup Success 0000028720: Plan Multicast IP Setup Success 0000028722: PlanDeviceActive Multicast IP Setup Success 0000028822: Hardware Init Complete, Start Main App TR2 :0000028829:TerminateNReset() Interface=ExecMain: No mode to terminate , Status=0 TR1 :0000028829:ChangeTrunkMode() Interface= Trunked Working channel mode was selected., Status=3 0000028829: ccArbitrationCompleteTimerTimer Failure 0000028829: Configuring Channel as Traffic Channel 0000028831: No FSL in MV 0000028838: CTIR Deregister cc to vpt connection = BsPrVn 0000028838: CTIR Deregister cc to vpt connection = MsPrVn 0000028838: CTIR Deregister cc to vpt connection = UsvMgP 0000028839: CTIR Deregister vpt to cc connection = CCPLRxP 0000028839: CTIR Deregister all msg connection = MsPrVn 0000028839: CTIR Deregister all msg connection = BsPrVn 0000028839: CTIR Deregister all msg connection = UsvMgP P25T Ch 06> P25T Ch 06>? Help Commands for the SitePro Monitor Type 'HELP ' to get details on one of the following commands: ^R - return previous command (rotates thru 20) Debug Commands: =============== LOG - Sets Logging/debugging parameters NOLOG - Turns Off logging SHOW, SHO - Displays the value of one or more personality parameters Regular Commands: ================= ? - Provides help on Commands and Parameters CLS - Clear the screen (VT100 compatible terminals) CMT - Commit Debug Masks & other config parameters to permanent storage HELP,HLP,H - Provides help on Commands and Parameters ISPTEST - Runs the specified test on the TCISPTask. PIC - Tells radio to place an Icall PING - Tests connectivity to another network device Press to Continue, or q to quit... RESET - Reboots this SitePro RI2C - Display I2C memory locations RUNHI - Runs the application code from the high flash area RUNLO - Runs the application code from the low flash area SET - Sets the value of a personality parameter TEST - Disables channel, enters TEST MODE, allowing station alignment Test Mode Commands: =================== BER - During Test Mode, Transmits 1011 hz test pattern CON - During Test Mode, Toggles Conventional Repeat Mode On/Off ESC - (or 'Q') Exit TEST Mode, re-enable channel LOC - Toggles the Local PTT line (PowerAmp) to allow DSP allignment Q - Exit TEST Mode, re-enable channel P25T Ch 06>SHOW FI Serial Number EP5197001215 Hardware Model Number EA-555004-001 Hardware Revision D MLAN Macaddress 00 06 EC 04 47 FD PLAN Macaddress 00 06 EC 04 47 FC ### PERSONALITY INFO ### P25T Ch 06>SHOW PERS ============================================================== Num All-Call Drop ETDUs: (numAllCallDropETDUs) 6 6h ----------------------------------------------------------------- Enabled Channel Alarms:(enabledAlarms) 7FFFFFh Alpha 1: (ALPHA1) 0 = DISABLED Enabled Site Bitmap:(enableSiteBitmap) 11111111111111111111111100000000b FFFFFF00h ----------------------------------------------------------------- Cnfm Asn Retry: (confirmedAssignmentRetryInterval) 5 5h Enable Authentication: (enableAuthentication) 0 = DISABLED CTL Alert Time: (conversationTimeLimitAlert) 10 Ah ----------------------------------------------------------------- Cnfm Asn Drop: (confirmedCallDropTime) 100 64h SNDCP Data Hang Time: (SNDCPDataHangtime) 10 Ah Data Mode: (DATAMODE) 1 = FNE MODE ----------------------------------------------------------------- Data Priority: (individualDataPriority) 2 2h Dotting Character: (rfOutboundDottingCharacter) 5Fh Emergency Call Hang Time: (emergencyHangtime) 2 2h ----------------------------------------------------------------- Number ETDUs in drop: (defNumDropETDUs) 4 4h Def. GrpDB Enable Test(defGIDEnableTest) 0 = DISABLED ss to Continue, or q to quit... Def.GrpDB DataCall Priority (defGIDDataPriority) 2 = 2h ----------------------------------------------------------------- Def.GrpDB Hangtime (defGIDHangtime) 0 = 0h Def. GrpDB Valid Bit (defGIDValid) 1 = ENABLED Def.GrpDB VoiceCall Priority (defGIDVoicePriority) 4 = 4h ----------------------------------------------------------------- HT Alert Time: (hangtimeAlert) 5 5h I Call Hang Time: (individualHangtime) 10 Ah I-Call Priority: (defLIDVoicePriority) 1 1h ----------------------------------------------------------------- Carrier Detect Time: (carrierDetectTime) 6.0 seconds carrier Clear Time: (carrierClearTime) 3.0 seconds USP Detect Time: (uspDetectTime) 6.0 seconds ----------------------------------------------------------------- USP Clear Time: (uspClearTime) 3.0 seconds LCW Background Msgs: (enableLCWBackgroundMsgs) 0 0h LCW Duty Cycle: (lcwDutyCycleInterval) 2 2h ----------------------------------------------------------------- Num LCW ISR Age Count: (numISROutboundInLCW) 1 1h # Updates Outbound LCW: (numUpdatesOutboundInLCW) 2 2h LRA: (locationRegistrationArea) 2 2h ----------------------------------------------------------------- Foreign:Ask First: (ForeignAskFirst) 1 = ENABLED Press to Continue, or q to quit... Lost Syncs Before Drop: (numLostSyncsBeforeDrop) 3 3h Local Audio Time-Out: (localAudioTimeout) 15 Fh ----------------------------------------------------------------- Remote Audio Time-Out: (remoteAudioTimeout) 105 69h Local Data Time-Out: (localDataTimeout) 20 14h Remote Data Time-Out: (remoteDataTimeout) 20 14h ----------------------------------------------------------------- Morse Code ID 1: (morseCode1) "Site 2" Msg Trunk Limit: (msgTrunkedMaxCallTime) 180 B4h Mute Status: (specifyMuteVectorForSilence) 0 0h ----------------------------------------------------------------- Interconnect Hang Time: (interconnectHangtime) 30 1Eh Preamble Dotting(ms): (preambleDottingTime) 60 3Ch NumPriorityMsgRepeats: (numPriorityMsgRepeats) 2 2h ----------------------------------------------------------------- rxNetworkAccessCode: (rxNetworkAccessCode) 16 10h Sys Srvc Broadcast:(systemServicesSupportedBitmap) 000011110110110001100011b F6C63h SysServices Class:(systemServiceClassBitmap) 01110000b 70h ----------------------------------------------------------------- Site Id: (SITEID) 1 1h Site name: (SITENAME) "VAR005" Site Type: (SITETYPE) 0 0h Press to Continue, or q to quit... ----------------------------------------------------------------- Swap source/target: (enableSourceTargetSwapping) 1 = ENABLED Sync Buffer Warn(ms): (syncBufferWarningInterval) 30 1Eh Enable TC UNID Filter: (enableTCLCWUnidFilter) 1 = ENABLED ----------------------------------------------------------------- TC Psi Channel Filter: (enableTCPsiChannelFilter) 1 = ENABLED TC Preempt Drop ETDUs: (numTCPreemptDropETDUs) 4 4h TC Duplex Audio Min ETDUs: (numTCDuplexAudioETDUs) 2 2h ----------------------------------------------------------------- TC Data Packet Pad Value: (tcDataPacketPadValue) F5h # Data Max Transmit:(maxNumTCDataTransmitAttempts) 4 4h Data Max Call Duration: (maxDataCallInterval) 30 1Eh ----------------------------------------------------------------- TC Data Max Fragment Len: (maxTCDataFragmentLength) 512 200h # Data Conf ETDU's: (minNumTCDataConfirmationETDUs) 3 3h Inb MsgTx Flg:(enableTCDataInboundMsgTrunkedFlag) 0 = DISABLED ----------------------------------------------------------------- TC Timer Interval: (tcTimeoutValue) (n-ms units) 100 64h Trans.Trunk Call Limit: (txTrunkedMaxCallTime) 180 B4h Tx Network Access Code: (txNetworkAccessCode) 16 10h ----------------------------------------------------------------- Def. UnitDB Channel Test Bit (defLIDEnableTest) 0 = DISABLED Press to Continue, or q to quit... Def. UnitDB I-Call (defLIDPrivICall) 1 = ENABLED Def. UnitDB Interconnect Call (defLIDInterconnect) 0 = DISABLED ----------------------------------------------------------------- Def. UnitDB Valid (defLIDValid) 1 = ENABLED VDPTXDelay: (vdpTxDelay) 5 5h Interconnect Setup: (interconnectSetupTime) 20 14h ----------------------------------------------------------------- Patch/Simulselect Mode: (patchSimulselectMode) 1 = Motorola MODE Voter's Address: (voterIpAddress) 0.0.0.0 Enh Msg Trunking: (enableEnhancedMsgTrunking) 1 = ENABLED ----------------------------------------------------------------- Channel: (CHANNEL) 0 0h Channel Frequency Plan:(CHANNELPLAN) TX_P25_CHID VHFUHFid Base_Freqcy ChSpcing BandWdth TxOffset --------------------------------------------------------------- 0 VHF/UHF 162000000 12500 12500 128 Logical Channel Table: (LOGICALCHANNEL) LogicalCh# TX_P25_CHID ChanTxFreq TX_FCC_Num RX_P25_CHID ChanRxFreq RX_FCC_Num ------------------------------------------------------------------------------- 1 0 169600000 608 0 163962500 157 2 0 170875000 710 0 164687500 215 3 0 171275000 742 0 163387500 111 Press to Continue, or q to quit... 4 0 173925000 954 0 163800000 144 5 0 0 1 0 167462500 1 6 0 170675000 694 TX IDEN 0 TX IDEN 7 0 172625000 850 0 167362500 429 8 0 173700000 936 0 163612500 129 ----------------------------------------------------------------- Default MLAN IP: (DFMLANIP) 0.0.0.0 Default MLAN Subnet Mask: (DFMLANSUBNET) 0.0.0.0 Default Gateway Address: (DFGWIP) 0.0.0.0 ----------------------------------------------------------------- Primary DNS IP Address (primaryDNSServerIpAddress) 0.0.0.0 DNS Backup IP Address (backupDNSServerIPAddress) 0.0.0.0 Active MLAN IP: (eth0IPAddress) 10.34.18.6 ----------------------------------------------------------------- Active MLAN Subnet Mask: (eth0SubnetMask) 255.255.255.224 Active Gateway Address: (GatewayIP) 10.34.18.30 PLAN IP: (eth1IPAddress) 10.34.18.38 ----------------------------------------------------------------- PLAN Subnet Mask: (eth1SubnetMask) 255.255.255.224 System/RegionId: (REGIONID) "016" (decimal) RF Subsystem/VNIC ID (rfSubSystemId) 2 2h Press to Continue, or q to quit... ----------------------------------------------------------------- CLI Automatic Logout must be: (cliAutoLogout) 600 258h UNID: (uniqueNetworkId) 1 1h WACN: (WACN) 783754 BF58Ah ----------------------------------------------------------------- Group Demand Limit (GRPDEMANDLIMIT) 2 2h Re-register Query Enable: (REREGQUERY) 1 = ENABLED VNIC IP Address (VNICIP) 10.34.0.10 ----------------------------------------------------------------- Virtual Users: #1: 016-199-7017 Grps: 19999 ### SHOW SYSLOGCFG ### P25T Ch 06>SHOW SYSLOGCFG P25T Ch 06> SYSLOG ORIGINATOR CONFIGURATION ========================================================= Collector IP Address: 10.34.0.129 Collector UDP Port: 514 Application name: Harris_P25T_BSC_TC Hostname: 10.34.18.6 Device Identifier: r16s2u6chn Error Logging Function Address: 0xF0FA4 Debug Logging Function Address: 0xEECAC Event Properties Table ====================== Event_ID Facility Severity MSGID_Params_Usage MSGID MSG_Params_Usage MSG ------------------------------------------------------- 0 1 4 0 CLI_LOCAL_LOGIN_SUCCESS 1 User %s logged in locally. 1 1 4 0 CLI_REMOTE_LOGIN_SUCCESS 1 User %s logged in remotely. 2 1 4 0 CLI_LOCAL_LOGIN_FAILURE 1 User %s failed to login locally. 3 1 4 0 CLI_REMOTE_LOGIN_FAILURE 1 User %s failed to login remotely. 4 1 4 0 CLI_LOGOUT 1 User %s logged out. 5 1 4 0 USER_DELETE 1 User %s was deleted. 6 1 4 0 USER_CREATE 1 User %s was created. 7 1 4 0 DEF_USERNAME_PWD_RESTORED 0 Device default user-id and password recovered locally 8 1 4 0 USER_PWD_CHANGE 1 User %s changed their password. 19 17 4 0 DM_VERSION_QUERY 0 Device code version was read. 20 17 4 0 DM_PERS_READ 0 Device personality was read. 21 17 4 1 DM_CODE_LOAD_BOOT_%s 0 Device loaded flash code. 22 17 4 1 DM_CODE_LOAD_LOADER_%s 0 Device loaded flash code. 23 17 4 1 DM_CODE_LOAD_APP0_%s 0 Device loaded flash code. 24 17 4 1 DM_CODE_LOAD_APP1_%s 0 Device loaded flash code. 9 16 4 1 DEVICE_BOOTED_%s 0 Device booted. 10 16 4 1 DEVICE_RESET_%s 0 Device reset. 11 19 4 0 PERS_ALTERED 0 Device parameters altered. 12 19 4 0 DEVICE_PARAMS_DEFAULTS 0 Device parameters reset to default. 13 19 4 0 MLAN_IP_ADDR_ALTERED 0 IP address was altered. 14 19 4 0 PLAN_IP_ADDR_ALTERED 0 IP address was altered. 15 19 4 0 DEF_MLAN_IP_ADDR_ALTERED 0 IP address was altered. 16 19 4 0 VOTER_IP_ADDR_ALTERED 0 IP address was altered. 17 19 4 0 GATEWAY_IP_ADDR_ALTERED 0 IP gateway was altered. 18 19 4 0 DEF_GATEWAY_IP_ADDR_ALTERED 0 IP gateway was altered. 25 18 1 0 RADIO_REG_FAILURE 2 User failed registration: sourceAddress=%u sourceWACN=%u sourceSysID=%u sourceID=%u 26 18 0 0 FLASH_WRITE_FAILURE 0 The hardware encountered a failure with writing to flash memory. 27 18 0 0 RF_TX_FAIL 1 RF_TX_FAILED:%s 28 18 3 0 UNCONF_DATA_RECV 1 %s 29 18 3 0 DATA_FAIL_EVENT 0 Attempt to write outside valid memory. ### TEST MODE LOG ### LDR > Help Commands for the Factory Test Monitor Type 'HELP ' to get details on one of the following commands: ^R - return previous command (rotates thru 20) ACCEPT - Accept Board as Factory Tested ALL - Run all Tests BBS - Tests the Battery Backed RAM CLS - Clear the screen (VT100 compatible terminals) CMT - Commit Configuration Parameters to permanent storage CPLD - Tests the CPLD DDR - Displays the DDR RAM Test Results DISP - Tests the LED Display FINFO - Displays factory Information FPGA - Tests the FPGA HELP - Provides help on Commands and Parameters HWREV - Update the Board Hardware Revision LEDS - Tests the LEDs NETSTAT - Shows Ethernet connections PING - Tests connectivity to another network device RESET - Reboots the Board SET - Sets the value of a personality parameter SHOW - Displays the value of one or more personality parameters UNACCEPT - Removes the board accepted signature VER - Displays the current version of the Factory Test code loaded LDR > ALL DDR RAM Test Start Addr: 0x00000000 End Addr: 0x07FFFFFF Completed Without Errors Battery Backed Ram Test ...... please wait Start Addr: 0x40400000 End Addr: 0x405FFFFF Completed Without Errors CPLD Test - Board Version 3 - CPLD Version 1 Completed Without Error FPGA Test - FPGA Version 4 Completed Without Error Composite status: PASSED --- Traffic Controller Board has been accepted --- Serial Number EP5197001215 Hardware Model Number EA-555004-001 Hardware Revision D MLAN Macaddress 00 06 EC 04 47 FD PLAN Macaddress 00 06 EC 04 47 FC LDR >SHOW Show personality parameters. usage: SHOW where: 'parameter' is a personality parameter or a display group. This command will illustrate the current value of the parameters specified. 'SHOW *' will illustrate ALL parameters. Display Groups and special parameters available: IP LDR > SHOW * LDR > ****************DISPLAY GROUP IP***************** Default MLAN IP: (DFMLANIP) 0.0.0.0 Default MLAN Subnet Mask: (DFMLANSUBNET) 0.0.0.0 Default Gateway Address: (DFGWIP) 0.0.0.0 Active MLAN IP: (MLANIP) 10.1.6.13 Active MLAN Subnet Mask: (MLANSUBNET) 255.255.0.0 Active Gateway Address: (GatewayIP) 0.0.0.0 CLAN IP: (CLANIP) 192.168.0.13 CLAN Subnet Mask: (CLANSUBNET) 255.255.0.0 PLAN IP: (PLANIP) 192.169.6.13 PLAN Subnet Mask: (PLANSUBNET) 255.255.0.0 LDR> SHOW IP Ethernet Parameters Each Channel must have unique M-LAN & P-LAN IP addresses ============================================================== Default MLAN IP: (DFMLANIP) 0.0.0.0 Default MLAN Subnet Mask: (DFMLANSUBNET) 0.0.0.0 Default Gateway Address: (DFGWIP) 0.0.0.0 ----------------------------------------------------------------- Active MLAN IP: (MLANIP) 10.1.6.13 Active MLAN Subnet Mask: (MLANSUBNET) 255.255.0.0 Active Gateway Address: (GatewayIP) 0.0.0.0 ----------------------------------------------------------------- CLAN IP: (CLANIP) 192.168.0.13 CLAN Subnet Mask: (CLANSUBNET) 255.255.0.0 PLAN IP: (PLANIP) 192.169.6.13 ----------------------------------------------------------------- PLAN Subnet Mask: (PLANSUBNET) 255.255.0.0 Management LAN Macaddress (NOT CHANGEABLE) 00 06 EC 04 47 FD PLAN Macaddress (NOT CHANGEABLE) 00 06 EC 04 47 FC LDR >NETSTAT LDR > Proto Local Address Foreign Address State TCP 192.168.0.13:23 0.0.0.0:0 INIT STATE UDP 0.0.0.0:15706 0.0.0.0:0 ACTIVE TCP 10.1.6.13:23 0.0.0.0:0 INIT STATE LDR > VER Personality and Code Versions =============================================== Bootcode Version: "R2A01.01" Loader Version: "R2A02.01" ================User Application 1 Load==[not active]==== S-Merge Version: "R10C06.01" ............................................... ControllerCard Code Version: "R10C06.01" ControllerCard PLD Version: "4" ================User Application 0 Load==[ACTIVE]======== S-Merge Version: "R10D03.01" ............................................... ControllerCard Code Version: "R10D03.01" ControllerCard PLD Version: "4" BBP Console Output: Connection to Baseband Processor COMM port gives the following message: \rndis_drv.cndisMsgndisOutndisCapRNDISMESSAGECAPTUREUnable to AllocaBad dataDHCP SOCKET FAILURE.\src\dhcp_server.cENET3MCAST_REBOOTver=%.12s, %ÿ
    What you see in pictures is what you will receive. Additional accessories are not included. If we have a quantity of this item available, it might not be the exact item in pictures but it will be in similar condition.
    For questions and inquiries, we are open Monday through Friday 8AM-5PM EST. We are closed on weekends and major US Holidays.
    R2/RIOS Certification Conditions:
    Potomac eCycle is certified to the R2/RIOS Standard which was created specifically for the Electronics Recycling industry to promote Environmental, Health and Safety. To comply with the standard we have implemented quality assurance plan and we categorize every item we sell into one of these R2/RIOS conditions.
    R2 Ready for Reuse:
    use effective test methods to confirm that all functions for equipment and components are working properly and ready for reuse, including properly configured with appropriate legally licensed software where required for operation of equipment and components, and device specific drivers within the product's hardware. This may include new items, new open box, new old stock, and items refurbished to close to factory specifications.
    R2 Ready for Resale:
    use effective test methods and testing equipment to confirm that the Key Functions of the equipment or components are working properly. This may include used items that have been fully tested but might lack software, have cosmetic issues, or have a part missing.
    R2 Ready for Repair /
    R2 Vintage Exception
    :
    this condition is strictly for items that are not functioning, and further, it is especially for items that have high numismatic value, such as old vintage radios that might not be operable, but in good enough cosmetic condition to restore.
    R2 Exempt:
    this condition is for items that do not contain any electronic components and therefore are exempt from the R2 Certification Conditions.