Corning SBA Drop-Down Housing, pigtailed SB124P24 -3C-3RH1P0 with hardware - NEW

Description

Corning SBA Drop-Down Housing, pigtailed SB124P24 -3C-3RH1P0 – with hardware - NEW
Manufacturer:
Corning
Model:
SB124P24 -3C-3RH1P0
Description:
SBA Drop-Down Housing
SBA Drop-Down Housing, pigtailed, 24 F, SC connectors, ribbon fiber, with M67-078 splice tray, no - lock, 3 m, Single-mode (OS2) with one box of installation hardware
Part Number:
SB124P24-3C-3RH1P0
The SBA Drop-Down Housing is a 1U-high housing that can be mounted into either a 19- or 23-in rack. The unit’s drawer slides out to accommodate up to 24 connectors and mass fusion or single-fiber splices. The drawer is designed to provide multi-position access when rack mounted.
The unit consists of two layers that can be separated depending upon the service task being performed. The top layer pivots up while the bottom remains stationary to provide access to the splice tray. Both top and bottom layers pivot down, if desired, to allow for easy access to the adapters. The drawer provides service loop storage that prevents kinking and allows easy removal of the splice tray to a nearby work area.
The SBA Drop-Down Housing is a 1U-high housing that can be mounted into either a 19- or 23-in rack. The unit’s drawer slides out to accommodate up to 24 connectors and mass fusion or single-fiber splices. The drawer is designed to provide multi-position access when rack mounted.
The unit consists of two layers that can be separated depending upon the service task being performed. The top layer pivots up while the bottom remains stationary to provide access to the splice tray. Both top and bottom layers pivot down, if desired, to allow for easy access to the adapters. The drawer provides service loop storage that prevents kinking and allows easy removal of the splice tray to a nearby work area. Fiber management and bend-radius controls are provided throughout the product to ensure signal integrity. The two layers help keep the splice tray protected and segregated from the adapter field.
The SBA Drop-Down Housing is designed for controlled environmental vault, hut and central office applications. In addition to standard rack-mounting brackets, an additional set of brackets is provided to allow for installation inside a cabinet where space is at a premium. The typical application provides an interconnect between outside plant fibers and electronic equipment. This unit allows for easy termination, rearrangement, and test access in one convenient location.
General Specifications
Application
Central Office, Carrier Networks
Mounting Type
Rack 19-in, Rack 23-in
Product Type
Rack-Mountable Hardware
Fiber Category
Single-mode (OS2)
Design - Hardware
Housing Type
SBA Drop-Down
Connector Polish
UPC
Connector Type A
SC
Fiber Count
24
Height Unit
1U
Pigtail Class
Ribbon
Pigtail Length
9.84 ft (3 m)
Mechanical Characteristics
Dimensions (HxWxD)
4.42 cm x 43.15 cm x 29.62 cm (1.74 in x 16.99 in x 11.66 in)
Design Adapter
Adapter Type
SC
Item is new, in open original packaging as shown on the images.
Accessories are included: one box of mounting/installation hardware as seen on the images.
The pictures are showing the actual product the buyer is getting.
International buyers are responsible to pay for the applicable importing fees and duty if it applies.
Thank you for looking.
Warranty:
Please note that I am not an authorized dealer for any of the products I sell. Therefore, I cannot guarantee that the item in this listing will be covered by the manufacturer's warranty or support.
For verification purpose I can provide SN for potential buyers before the purchase upon request.
Return Policy:
If the item you purchased was misrepresented by me or it was damaged during shipping, you can obtain a full refund. In order to receive your refund, you must notify within 30 days of receiving your item.
In case you have received the item in a damaged condition you must keep all packaging material for inspection and please notify me ASAP after receiving it and
please provide pictures.
Full refund (including original S&H) only applies for defective items and it must be sent back in the original condition; including the original accessories and all packing materials.
Restocking Fee (up to 15%) will be charged for any item without original package, abused, altered, or damaged.
I will not accept returned items with missing accessories or packaging.
Returns require my approval and return authorization and item must be received by me before I can issue your refund.
Please note: I record all serial numbers to discourage fraud.