35 in Gas Thermocouple Kit Sensor Leisure Fridge Boiler Grill Fireplace Stove

Description

35 in. Propane Heater Thermocouple Sensor For Gas Fridge Fireplace Stove Grill
Feature:
The Universal Thermocouple Total Length 600mm
Head thread size: M8*1
End Nut size to connect valve: M8*1
Volatge: ＞20mV, Open valve time less than 10s
Used for gas fireplace, fire pit, grill, Stove, catering cooker, patio heaters etc
We are uniquely positioned to serve the repair parts needs of RVing families, whether it's while
enjoying weekends outdoors in a small trailer or traveling full time in a custom coach. Our
growing line of repair parts and expert customer service provides the security of a trusted,
established name to turn to when repair parts are needed.
If you have any question,please contact us.We will reply to you within one working day
Application:
Fit for all brands of gas refrigerator,such as Demetic，Smad，Diamond，Unique,etc.
Installation
Installing 098514-01 and other similar thermocouple kits.
1. Turn gas off to appliance.
2. Remove front panel from heater by removing the screws holding front panel to the cabinet.
3. Remove thermocouple wire from gas valve base by turning counter clockwise with a 5/16" wrench (see Figure 1).
4. Locate the pilot assembly and, with a Phillips screwdriver, remove  screw that holds the bracket for the thermocouple and igniter (see  Figure 2).
5. Remove thermocouple and replace with new thermocouple.
6. Replace bracket and tighten screw.
7. Finger tighten thermocouple wire at base of gas valve. With 5/16" wrench, turn 1/4 turn clockwise.
8. Replace front panel on heater.
9. Turn gas on to appliance.
Figure 1: Thermocouple Connection to Gas Valnes
Figure 2: Pilot Assembly
On Jul-06-21 at 05:28:22 PDT, seller added the following information: