2.3HP Post Pile Driver 52CC 2stroke Gas Powered T Post Driver Piledriver 55x70mm

Description

Gas Powered Post Driver 52CC 2 Stroke Gasoline Engine Push Pile Driver 55mm 70mm
Specification:
Brand New
Engine type:
two-stroke, air cooling, single cylinder
Displacement:
52cc
Fuel type: mixed Oil (25 gasoline: 1 motor oil)
Fuel tank capacity: 1 L
Max. power & speed:
1900W(2.3HP)/6500r/min
Max. torque & speed: 2.5N.m/5500r/min
Fuel consumption rate: ≤0.6L/h
Impact frequency: 1300-3000BPM
Impact energy:
25-45J
Carburetor type: MZ15-048
Spark plug type:
BM6A
Starter System:
Hand pull start
Size: approx. 74*34*26cm
Post driving head mount size: (
55、70mm
)
Feature:
Easy recoil starter.
Comes with
2 post driving head (55、70mm)
makes this a perfect choice
for T-Posts, Y-Posts
and ground rods.
Vibration absorbing springs for
stable operation.
Superior cooling vents for prolonged use and smooth running.
Interlocking controls with throttle adjuster.
Heavy-duty aluminium
driver casing.
rubber and plastic sponge handle which can greatly reduce the recoil force of the machine.
Lightest weight, simple one man operation, lowest displacement.
Easy to use.
Durable in use.
This gasoline post driver provides maneuverability and usability of being able to drive almost anything.
Package included:
1 x petrol post driver
2 x post driving head
1 x mixing oil bottle
1 x tools kit
Note:
Please allow 1-3cm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
Tips:
1. If the pile driver has the problem of not hammering:
(1). Whether too much butter is added at the place where the butter is added, clean up the excess oil in the cylinder before disassembling and re-add about 20g of high temperature resistant butter.
(2). The speed of the carburetor can be slightly fine-tuned. If the impact frequency is too high, it can be lowered if the hand cannot hold it. Otherwise, the impact frequency should be increased. Note that it is fine-tuning.
2. The machine is not easy to start.
First, check the ratio of oil: gasoline: oil = 25:1, be sure to use a good second-flush oil. The starter rope is pulled out an arm's distance, and it can be started by pulling it two or three times in a row, but it is also related to the temperature, and sometimes it needs to be pulled several times. When the cold engine starts, close the damper (for good start, the warm engine can be opened and start) and open the damper after the machine is normal.
On Nov 11, 2022 at 02:55:04 PST, seller added the following information: